Recent files
NetCam SC H264 Vandal Dome 1.1.82 Firmware
netcamscd-5407-1.1.82.bin
Released December 9th, 2016
**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page. WARNING: All firmware on this page is only compatible with camera IDs (MAC address) that begin with: 00:30:F4:EB (SDH500V) 00:30:F4:EC (SDH500VN) 00:30:F4:ED (SDH300V) 00:30:F4:EE (SDH130V) 00:30:F4:EF (SDH130VN) 00:30:F4:F1 (SDH300VN) If this firmware is used with any other StarDot device, it can leave the device inoperable. The following H.264 Vandal Dome camera MAC ID ranges are NOT compatible with this firmware: SDH500V: 00:30:F4:EB:00:00 - 00:30:F4:EB:00:05 SDH500VN: 00:30:F4:EC:00:00 - 00:30:F4:EC:00:10 SDH300V: 00:30:F4:ED:00:00 - 00:30:F4:ED:00:1F SDH130V: 00:30:F4:EE:00:00 - 00:30:F4:EE:00:03 SDH130VN: 00:30:F4:EF:00:00 - 00:30:F4:EF:00:25 If your dome camera has a MAC address in one of the ranges above, only upgrade to the netcamsc (not scd) firmware.
NetCam SC H.264 10 Megapixel Dome Camera 1.1.82 Firmware
netcamscdx-5407-1.1.82.bin
Released December 9th, 2016
**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page. WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with: 00:30:F4:F2 If this firmware is used with any other StarDot device, it can leave the device inoperable.
NetCam SC H.264 10 Megapixel Box Camera 1.1.82 Firmware
netcamscx-5407-1.1.82.bin
Released December 9th, 2016
**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page. WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with: 00:30:F4:F4 If this firmware is used with any other StarDot device, it can leave the device inoperable.
NetCam SC H264 1.1.82 Firmware
netcamsc-5407-1.1.82.bin
Released December 9th, 2016
**NOTE** - See Comments below for cameras with certain MAC addresses. Those should only use 1.1.75 firmware **NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page. **NOTE for h.264 cameras** You MUST clear the configuration files during the upgrade to 1.1.78 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings. WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with: h.264 box cameras: 00:30:F4:E6 00:30:F4:E7 00:30:F4:E8 00:30:F4:E9 00:30:F4:EA 00:30:F4:F0 mjpeg cameras: 00:30:F4:D0 00:30:F4:D1 00:30:F4:D2 00:30:F4:D3 00:30:F4:D5 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW 00:30:F4:E0 00:30:F4:E1 00:30:F4:E2 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW 00:30:F4:E4 00:30:F4:E5 If this firmware is used with any other StarDot device, it can leave the device inoperable.
NetCam LIVE 1.1.82 Firmware
netcamlive-5407-1.1.82.bin
Released August 2nd, 2016
**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page.
NetMonitor-StarDot-RemoteClient-1.0.9.6
NetMonitor-StarDot-RemoteClient-1.0.9.6.exe
Remote Client to connect to PC with NetMonitor Server Installed
-- Note: This software is compatible with the following StarDot Products SDHQ Series SDHM - DTV DVR Series
NetMonitor-StarDot-1.0.9.6
NetMonitor-StarDot-1.0.9.6.exe
Server installation and local client
-- Note: This software is compatible with the following StarDot Products SDHQ Series SDHM - DTV DVR Series
NetCam SCB 1.1.85 Firmware
netcamscb-1.1.85.zip
WARNING: Firmware file is zipped. You will need to unzip the file and use the .img file for the firmware upgrade
All firmware on this page is only compatible with camera IDs (MAC address) that begin with: 00:30:F4:88 00:30:F4:A8
Express 2 / Express 4 / Express 8 Video Server 1.1.80 Firmware
expressxl-5407-1.1.80.bin
Released October 1st, 2014
NetCam SC H.264 10 Megapixel Dome Camera 1.1.75 Firmware
netcamscdx-5407-1.1.75.bin
Released August 9th, 2012
WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with: 00:30:F4:F2 If this firmware is used with any other StarDot device, it can leave the device inoperable.
NetCam SC H264/MJPEG 1.1.75 Firmware
netcamsc-5407-1.1.75.bin
Released August 9th, 2012
**NOTE for h.264 cameras** You MUST clear the configuration files during the upgrade to 1.1.75 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.
NetCam SC H264/MJPEG 1.1.71 Firmware
netcamsc-5407-1.1.71.bin
Released May 11, 2011
**NOTE for h.264 cameras** Your MUST clear the configuration files during the upgrade to 1.1.71 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.
NetCam XL 3MP 1.1.80 Firmware
netcamxl-5407-1.1.80.bin
Released October 1st, 2014
**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page. If your current NetCam XL firmware is 1.1.51 or earlier, you must upgrade to 1.1.52 first.
NetCam SC H.264 10 Megapixel Box Camera 1.1.75 Firmware
netcamscx-5407-1.1.75.bin
Released August 9th, 2012
WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with: 00:30:F4:F4 If this firmware is used with any other StarDot device, it can leave the device inoperable.
Express 2 / Express 4 / Express 8 Video Server 1.1.69 Firmware
expressxl-5407-1.1.69.bin
Released September 9, 2010
netcam-5407-1.1.53.bin
WARNING!
Warning: It is possible to render your camera inoperable if the following upgrade rule is not followed. Before you can upgrade from 1.1.51 or lower to 1.1.53 or higher, you MUST first upgrade to 1.1.52 first. If you attempt to upgrade directly from 1.1.51 or lower to 1.1.53 or higher, the camera will no longer function. The proper way to ugprade is to upgrade to 1.1.52 first and then you can upgrade to 1.1.53 or higher. |
Powered by KBPublisher (Knowledge base software)