Released October 1st, 2014

**NOTE** - See Comments below for cameras with certain MAC addresses. Those should only use 1.1.75 firmware

**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page.

**NOTE for h.264 cameras**
You MUST clear the configuration files during the upgrade to 1.1.78 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.

WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with:

h.264 box cameras:
00:30:F4:E6
00:30:F4:E7
00:30:F4:E8
00:30:F4:E9
00:30:F4:EA
00:30:F4:F0

mjpeg cameras:
00:30:F4:D0
00:30:F4:D1
00:30:F4:D2
00:30:F4:D3
00:30:F4:D5 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW
00:30:F4:E0
00:30:F4:E1
00:30:F4:E2 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW
00:30:F4:E4
00:30:F4:E5

If this firmware is used with any other StarDot device, it can leave the device inoperable.

Released March 11, 2013

**NOTE for h.264 cameras**
You MUST clear the configuration files during the upgrade to 1.1.75 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.

Released August 9th, 2012


**NOTE for h.264 cameras**
You MUST clear the configuration files during the upgrade to 1.1.75 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.

Released May 11, 2011


**NOTE for h.264 cameras**
Your MUST clear the configuration files during the upgrade to 1.1.71 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.

Released February 22, 2010

Released March 10, 2009

Released June 4, 2008