StarDot Knowledge Base
NetCam SC H264 Box Camera
NetCam SC H264 1.1.82 Firmware Download
netcamsc-5407-1.1.82.bin
Released December 9th, 2016

**NOTE** - See Comments below for cameras with certain MAC addresses. Those should only use 1.1.75 firmware

**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page.

**NOTE for h.264 cameras**
You MUST clear the configuration files during the upgrade to 1.1.78 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.

WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with:

h.264 box cameras:
00:30:F4:E6
00:30:F4:E7
00:30:F4:E8
00:30:F4:E9
00:30:F4:EA
00:30:F4:F0

mjpeg cameras:
00:30:F4:D0
00:30:F4:D1
00:30:F4:D2
00:30:F4:D3
00:30:F4:D5 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW
00:30:F4:E0
00:30:F4:E1
00:30:F4:E2 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW
00:30:F4:E4
00:30:F4:E5

If this firmware is used with any other StarDot device, it can leave the device inoperable.
11 Jun, 2020 3.48 mb
NetCam SC H264/MJPEG 1.1.80 Firmware Download
netcamsc-5407-1.1.80.bin
Released October 1st, 2014

**NOTE** - See Comments below for cameras with certain MAC addresses. Those should only use 1.1.75 firmware

**NOTE** - We Recommend using StarDot Tools to upgrade and to use the Erase Configuration option when upgrading. You can find the latest version of StarDot Tools on the Downloads page.

**NOTE for h.264 cameras**
You MUST clear the configuration files during the upgrade to 1.1.78 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.

WARNING: Firmware on this page is only compatible with camera IDs (MAC address) that begin with:

h.264 box cameras:
00:30:F4:E6
00:30:F4:E7
00:30:F4:E8
00:30:F4:E9
00:30:F4:EA
00:30:F4:F0

mjpeg cameras:
00:30:F4:D0
00:30:F4:D1
00:30:F4:D2
00:30:F4:D3
00:30:F4:D5 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW
00:30:F4:E0
00:30:F4:E1
00:30:F4:E2 - DO NOT USE THIS VERSION OF FIRMWARE FOR THIS CAMERA. USE 1.1.75 OR BELOW
00:30:F4:E4
00:30:F4:E5

If this firmware is used with any other StarDot device, it can leave the device inoperable.
11 Jun, 2020 3.39 mb
NetCam SC H264/MJPEG 1.1.78 Firmware Download
netcamsc-5407-1.1.78.bin
Released March 11, 2013

**NOTE for h.264 cameras**
You MUST clear the configuration files during the upgrade to 1.1.75 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.
11 Jun, 2020 3.02 mb
NetCam SC H264/MJPEG 1.1.75 Firmware Download
netcamsc-5407-1.1.75.bin
Released August 9th, 2012


**NOTE for h.264 cameras**
You MUST clear the configuration files during the upgrade to 1.1.75 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.
11 Jun, 2020 2.94 mb
NetCam SC H264/MJPEG 1.1.71 Firmware Download
netcamsc-5407-1.1.71.bin
Released May 11, 2011


**NOTE for h.264 cameras**
Your MUST clear the configuration files during the upgrade to 1.1.71 or the H.264 video will not be enabled. Using StarDot Tools, you can clear the configuration files while retaining the network settings.
11 Jun, 2020 2.88 mb
NetCam SC H264 1.1.69 Firmware Download
netcamsc-5407-1.1.69.bin
Released September 9, 2010
11 Jun, 2020 2.82 mb
NetCam SC H264 1.1.68 Firmware Download
netcamsc-5407-1.1.68.bin
Released July 13, 2010
11 Jun, 2020 2.81 mb