StarDot Knowledge Base

What size conduit should I use with Stardot Network/Power cables?

Article ID: 154
Last updated: 11 Jun, 2020

1/2" conduit. Because the Network/Power cables are pre-assembled with the RJ45 plugs and power plugs, the cable ends will be a tighter fit than the cable but 1/2" conduit is generally large enough (1/2" conduit has an inner diameter of at least 0.6").

If you will be running two or more Network/Power cables, consider using 3/4" conduit.

Article ID: 154
Last updated: 11 Jun, 2020
Revision: 1
Access: Public
Comments: 0
Also listed in