Yes. You can always browse to the image directly. On StarDot cameras you can use:
On StarDot Video Servers:
http://ipaddress/jpeg.cgi?0 (Camera 1 = jpeg.cgi?0, Camera 2 - jpeg.cgi?1. etc)
If you would like to view the image(s) live, you will need to upgrade your firmware to 1.1.61 or higher (This applies to Express Servers, NetCam XL, SC and H.264 models only). Please contact firstname.lastname@example.org to request this version.
var refreshrate=5; //SECONDS BETWEEN REFRESH
var image="camera0.jpg"; //IMAGE NAME
var imgwidth=640; //IMAGE WIDTH
var imgheight=480; //IMAGE HEIGHT
document.write('<IMG SRC="'+image+'" NAME="pic" ID="pic" WIDTH="'+imgwidth+'" HEIGHT="'+imgheight+'";">');
In this example, the camera is uploading 'camera0.jpg' to the website. On an html page in the same directory you would copy and past this code, then set your you would set the Refresh time to how often you want the image to refresh on your page. Next, your width and height to what your camera is currently using.
Article ID: 69
Last updated: 11 Jun, 2020