StarDot Knowledge Base
Advanced Help Files
Trigger Properties
TRIGGER A sequence of images can be buffered and uploaded when triggered by an event (such as a door opening or an alarm system). Both pre- and post-trigger images can be stored and either emailed or uploaded to an FTP server. ENABLED ...
11 Jun, 2020 Comments: 0
DDNS Properties
TZO DYNAMIC DNS In most cases, the NetCamXL, or the router the NetCamXL is plugged into, will be connected to the Internet via a dynamic public IP address. This means the IP address changes and without knowing what the IP address is, one cannot browse directly...
11 Jun, 2020 Comments: 0
PTZ Properties
PTZ The NetCamXL is capable of controlling Pan/Tilt/Zoom hardware via the RS-232 port. Some PTZ hardware requires an RS-485 connection. If this is the case, you can use an RS-232 to RS-485 converter. ENABLED This option...
11 Jun, 2020 Comments: 0
Manual Config
Allows you to manually edit/configure system files. WARNING: These files should not be edited unless you are well versed in the operation of the NetCam. It is possible to render the NetCam inoperable if you directly edit the configuration files.
11 Jun, 2020 Comments: 0
Miscellaneous
Allows you to reboot the camera or upgrade the firmware.
11 Jun, 2020 Comments: 0
Weather Properties
WEATHER STATION Certain models allow an optional Compact Weather Station to be connected to the device's serial port. The weather data (temperature, humidity and barometric pressure) is polled every 5 minutes and is displayed in the image overlay. ...
11 Jun, 2020 Comments: 0