1.1.75 - Released August 3, 2012
ChangeLog
- Version 1.1.75.
- Version 1.1.75-pre14.
- bit files for the "final" pre
- Version 1.1.75-pre13.
- new bit file with different reset logic for video out
- Version 1.1.75-pre12.
- stardot: Move hardware reset during device initialization to fix video out.
- Revert to production version of NetCamSC 5MP H.264 firmware.
- Version 1.1.75-pre11.
- new test bit file
- new bit file
- Version 1.1.75-pre10.
- bit file to test fix for video out
- Version 1.1.75-pre9.
- NetCamSCX/NetCamSCDX: Change default resolution for 2.5MP devices.
- stardot: Revert FPGA load status register check in stardot_init().
- stardot: Fix FPGA load status register in stardot_init().
- Remove ITT build.
- Remove user/group changes from ITT build.
- Version 1.1.75-pre8.
- [Bug #1238] PTZ control sent via serial port is not buffered.
- awk: Add PROCINFO builtin array support.
- 2.5M bit files for 1.1.75
- 10MP bit files for 1.1.75
- last of the 5M for 1.1.75
- new bit file for dome
- Version 1.1.75-pre7.
- new SC5M bit file for 1.1.75
- stardot: Check FPGA load status register in stardot_init().
- xfpga: Fix firmware reload retry on stardot_init() failure.
- Hide various flash ROM programming information messages.
- Update copyright notices in stardot and xfpga drivers.
- Version 1.1.75-pre6.
- flatfsd: Use atomic erase/write when saving configuration data.
- h264: Add lost interrupt debugging logic for H.264
- flatfsd: Use syslog(3) instead of stderr for various messages.
- video-watchdog: Log hardware ID and output of /proc/video.
- Version 1.1.75-pre5.
- ITT build: Fix web configuration authorization for "admin" user.
- Version 1.1.75-pre4.
- Add "ITT" build for Thailand.
- admin.cgi: Avoid saving to flash ROM if configuration has not changed.
- Add support for Spansion S29GL032N 4MB flash ROM.
